SSVA-500 Welding inverter
SSVA-500 Welding inverter
MIG/MAG MMA Spot TIG
SSVA-500 – multifunctional inverter welding power source
As of now types and modes welding are available:
- MMA – manual metal arc welding;
- MIG/MAG – gas-shielded arc welding with mechanized feeding of welding wire:
- short-circuit metal transfer mode;
- spray metal transfer mode;
- two “PULSE MIG/MAG” (pulsed welding) modes: simple and advanced. Aluminum welding in argon is possibility.
- TIG – tungsten inert gas arc welding with contacting arc ignition – with сrater filling;
- Spotter – resistance welding.
PRICE:
from 46800 UAH
/ from 46800 UAH including VAT
SPECIFICATIONS
HIGHLIGHTS
PACKAGE CONTENTS
AVAILABLE VARIANTS
SPECIFICATIONS
| Item | Value | Note |
|---|---|---|
| Nominal voltage, V | 3×380 | Voltage tolerance: -15...+10 % |
| Operating ambient temperature range, °C | -30…+45 | There are no fundamental limitations for operation at lower temperatures |
| Consumed power, kVА, not over | 24 | |
| No-load power, W, not over | 130 | |
| Current rating of automatic circuit-breaker, А | 63 | |
| Rated duty cycle, %, not less | up to 420 А ― 100, 500 А ― 60, 550 А ― 50 |
|
| Overall efficiency, %, not less | 89 | |
| Power factor (cos φ) | 0,9 | |
| Electrode diameter, mm | 1,6―6,0+ | With any electrode coating |
| Wire diameter, MIG/MAG mode, mm | 0,8―2,0 | |
| Output voltage adjustable range, MIG/MAG mode, V | 0,0―42,0 | 30―550 А |
| Output amperage adjustable range, A | 15―550 | In MMA welding |
| Insulation resistance at voltage of 2.5 kV, MΩ, not less | 50 | |
| Protection degree | IP23 | |
| Welding processes | MIG/MAG/MMA/TIG/ spot welding | |
| Dimensions (Length × Width × Height), mm | 710 × 225 × 450 | |
| Weight, kg, not over | 32,0 | Without welding cables |
HIGHLIGHTS
SSVA-500 – multifunctional inverter welding power source – is:
- a powerful industrial welding inverter;
- maximum welding current is 650 A; at a nominal welding current of 420 A rated duty cycle is 100 %, at a nominal welding current of 500 A – not less than 60 %;
- most advanced circuit engineering, fully digital control by a powerful ARM-microcontroller with a Cortex core for real-time applications;
- industrial protection level of the board;
- a large color display with convenient control by a joystick;
- available welding types: MMA, MIG/MAG, TIG, mode of a "spot welder";
- in MIG/MAG mode, welding can be with using of technology of short-circuit metal transfer, spray metal transfer, pulsed welding, STT (test mode)
PACKAGE CONTENTS
- SSVA-500 current source inverter — 1 pce
- 4 m welding cable (КГ) 1 × 50 with MK 600 ABICOR BINZEL ground clamp — 1 set
- Operation manual — 1 pce
AVAILABLE VARIANTS
It is possible to install a built-in 36V power supply (enough for a gas heater no worse than 36V, 5A). Please check the cost and terms of this modification in the manufacturer's service center.
We reserve the right to change technical specifications in order to improve reliability, improve consumer properties and add new functionality.
